Регистрация: 9.3.2013
Сообщений: 23
Откуда:
|
| |
Many times as I boast created a DVD from an AVI file and played it on my TV, I would boast to raise the TV volume almost all the way to highest in order to hear the actors. Then when the action switched, the TV would blare comatose as a consequence almost make me deaf so I would have to lower the volume. Of lessons on behalf of become quiet scenes I had to raise the volume over once more. This in progress to progress exceptionally trying. I told myself there had to be a way wherever I could normalize the AVI and enjoy the volume level at typical TV volumes so that I would not enjoy to constantly nurture and lower the volume depending on what part of the movie I was watching.
I had the similar troubles for my mp3 composition files but I was skilled to equalize these so with the intention of they all played at the same volume when I played the CD in my van or audio system. The volume Rolex replicas Rolex from an AVI walk in single summary cannot be treated the same as a mp3 music, as the AVI has a much wider range of sound. AVI jingle can go from exceptionally low to exceptionally high where mp3 dimensions tends to be at a more steady level.
To see if I could do something similar, I performed an experiment with an AVI file, that when I created a DVD, had this very low part causing the TV part to be cranked up and cranked down constantly.
The subsequent were the software programs I second-hand.
1) Audiograbber 1.83 by Jackie Franck
2) MP3gain by SourceForge
3) Normalize-0.253 by Manual Kasper
4) Pers-o-FrontEnd 4 Normalize Gui in lieu of Normalize-0.253
5) Pazera Audio Extractor
6) AVIcodec
All the greater than software are limitless meant used in place of download. Just Google as a consequence learn. The first thing we need to do is to find out what type of audio information is in the AVI. We do this by in a row the AVIcodec plan. We select the AVI in question along with then click on it in the program to see its characteristics.
In an AVI the audio is typically mp3 also can be either of the following:
1) Bit percentage of 128 kbs, Sampling frequency of 44,100 hz also Channels 2-stereo, or
2) Bit percentage of 128 kbs, Sampling frequency of 48,000 hz also Channels 2-stereo
The first thing we do is wring the audio file from the AVI using Pazera. We extract one audio march as a PCM wav march. We then mine the audio case again but as an mp3 case. The mp3 smooth is typically the audio that is encoded in the AVI vedio smooth. If the mp3 row is sampled at 48000 hz then you need to extract it first at 44100 hz as that is the way Rolex replica Rolex audiograbber expects the wav row to be.
We rename the annals as:
1) TestPCM.wav for the PCM sandpaper
2) TestMP3.mp3 for the mp3 file
We now undo Audiograbber moreover key the regularize glass. We enter the 44100 hz PCM wav TestPCM.wav moreover then press the investigate close to go with its peak moreover middling (volume) treasure.
The subsequent were the fallout:
Peak Value: 77.77
Average Value: 13.68
By mp3 size standards the mode would be careful to be on the zealous low part. We currently release the MP3gain program and put in the mp3 file TestMP3.mp3 furthermore perform a track analysis which gave:
Volume: 82.6
Since this had been converted to a DVD, it appears then that if the mp3 extracted audio record has a volume of 82.6, followed by this tin container be painstaking exceedingly low for normal DVD conversion.
We now run the Pers-o-frontend GUI also input the 44100 hz TestPCM.wav walk in single record. We wear and tear up the -m parameter at 100% to prearranged entirely crest audios to 100%. To become 100% the code indicated it had to use a put on factor of 2.184 dB
We at once use audiograbber and input the -m custom-made TestPCM.wav and do a try dart which gave the next:
Peaks: 100
Average: 17.58
We see with the intention of even with audio peaks every part of set to 100%, the volume was still on the low margin. I have found that applying a win of about 12 db permanently seemed to give good tome RolexRolex levels. Since the -m decision functional on 2 db of gain, then we solitary have to to stick on to a gain of 10 db to the modified TestPCM.wav to grow its overall size. We run the Pers-o-frontend GUI as well as again input the -m modified TestPCM wav. This count, but, we indicate the -a choice at 10 db. Now we run Audiograbber again plus this time input the -a modified file plus do a test run.
The following values were straight away publicized for the -m and -a tailored TestPCM.wav organize:
Peak: 100%
Average: 53.09
We see that the Average (Volume) rank increased dramatically and is within a good section rank. Now we run Pazera over yet another time then convert the -m then -a personalized TestPCM.wav smooth to an mp3 smooth. We run MP3gain then input this new modifed mp3 file then do a track analysis which gave:
Volume: 94.4
The MP3gain showed a part increase from 82.6 to 94.4, about 12 db of reward which agreed as well as the 2.184 db peak expand along with 10 db amplification expand.
The AVI file was in that case coverted to DVD by the -m and -a custom-made TestPCM.wav as its put in audio which would automatically reinstate the audio that the AVI was completed by way of. When played on the TV, audio volumes were quite uniform and within the average TV tome levels. This was a dramatic improvement fake Rolex President Rolex Rolex President replica Rolex over converting the AVI file in addition to the audio it was made in addition to.
We canister now prйcis the pull up formula to Normalize the AVI sleeve prior to DVD conversion.
Step 1:
Using Pazera, haul out the audio parade first as an mp3 parade, which is I beg your pardon? it normally should be.
Step 2:
Using MP3gain, do a road examination to ascertain the quantity balanced.
a) If the quantity level is around 82 in that case proceed to Step 3.
b) if the volume level is around 92 db or higher then do the following:
i) Using Pazera, mine the audio as PCM wav, sampling frequency does not matter
ii) Using the Pers-o-frontend GUI, modify Rolex replica GMT 2 Rolex swiss Rolex fake watch Rolex the PCM wav with only the -m 100 option
iv) Convert the AVI to DVD using the -m custom the bestrolex Rolex the bestRolex-made PCM wav as the video audio source.
Step 3:
i) Using Pazera, dig out the audio another time as a PCM wav, sampling frequency does not topic.
ii) Using the Pers-o-frontend GUI, revise the PCM wav plus individual the -m 100 selection. Take suggestion of the gain to the syllabus uses to multiplication the peaks to 100%, say x db.
iii) Still using the Pers-o-frontend GUI, participation the -m modifed PCM wav save for now exchange to the -a opportunity regular for a gain of (12-x) db.
iv) Convert the AVI to DVD by the -a customized PCM wav as the cassette audio informer.
So far this AVI normalization method has worked quite well creating able DVD degree levels. |
|
сейчас на сайте
Mexico; Give replica watches review Rolex All Mexicans Credi
Распечатать топик
Письмо другу
Список
Дерево
